How to install LED strip light

The space where you intend to hang the LEDs should be measured.Calculate the approximate amount of LED illumination you will require. Measure each area if you plan to install LED lighting in multiple areas so you can later trim the lighting to the appropriate size.To determine how much length of LED lighting you will need to buy overall, add the measures together.
1. Before you do anything else, plan out the installation. Consider drawing a sketch of the space, indicating the locations of the lights and any adjacent outlets to which they can be connected.
2. Don’t forget to factor in the distance between the LED light position and the closest outlet. If necessary, get an extension cord or a longer lighting cord to make up the difference.
3. You can purchase LED strips and additional materials online. They are also available at some home improvement stores, department stores, and light fixture merchants.

Examine the LEDs to determine the voltage they need.If you’re buying LED strips online, check the product label on the website or on the strips themselves. LEDs can run on 12V or 24V power. You must have an appropriate power source if you want your LEDs to last for a long time. If not, there won’t be enough power for the LEDs to function.
1. LEDs can usually be wired to the same power supply if you intend to use numerous strips or cut them into smaller strips.
2. The 12V lights use less power and fit nicely in most places. However, the 24V variety has longer lengths and shines brighter.
Find out how much power the LED strips can use.Wattage, or electrical power, is the amount that each LED light strip uses. The length of the strip determines this. To find out how many watts per 1 foot (0.30 m) the lighting uses, consult the product label. Next, divide the wattage by the total length of the strip you intend to install.

To determine the minimum power rating, multiply the power usage by 1.2.The outcome will show you how powerful your power source has to be to maintain the LEDs’ power. Add an additional 20% to the amount and consider it your minimum because the LEDs can require a bit more power than you expect. In this manner, the available power will never go below what the LEDs need.

To determine the minimum amperes, divide the voltage by the power usage.To power your new LED strips, one final measurement is necessary. The speed at which an electrical current moves is measured in amps, or amperes. The lights will dim or turn off if the current flows over a lengthy section of LED strips too slowly. A multimeter can be used to measure the amp rating, or some basic math can be used to estimate it.

Make sure the power source you buy meets your power needs.Now that you know enough, you may choose the ideal power source to turn on the LEDs. Locate a power source that fits both the amperage you previously determined and the maximum power rating in watts. Brick-style adapters, such those used to power laptops, are the most popular kind of power supply. Simply plugging it into the wall after attaching it to the LED strip makes it incredibly simple to operate. The majority of contemporary adapters include the components required to connect them to LED strips.

Contact us if you need any help about LED strip lights.